Sutton Carbide Drills

Public Channel / Catalogues

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Post comment with email address (confirmation of email is required in order to publish comment on website) or please login to post comment

1. Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings CARBIDE DRILLS

26. Aluminium Chromium Nitride The latest tool coating formula is Aluminium Chromium Nitride (AICrN). Coatings of this G6 generation developed, markedly expand the performance envelope versus conventional titanium based coatings (such as TiAIN, AITiN or TiCN). Unique coating properties The AICrN coating exhibits until now, an unmatched degree of oxidation resistance and hot hardness. These properties have triggered a quantum leap in tool wear resistance. The bottom line: greater productivity! Tools coated with AlCrN let you choose noticeably higher cutting speeds and allow you to more effectively exploit the potential of modern machine tools. You can produce more parts per time / unit to decisively boost the productivity of your manufacturing resources and hone your competitive edge. Extraordinary performance gains have been demonstrated in dry and wet machining processes involving: • Unalloyed steels • High strength steels • High hardness steels (up to 54 HRC) Coating properties: • Very high abrasion resistance • High and constant temperature resistance • Unrivalled oxidation resistance • Titanium free coating AlCrN: G6 generation coatings... a quantum leap in tool wear resistance

22. HA NOTE: HE shanks available, subject to lead time. - Suitable for materials up to 1400N/mm 2 - Strong core with internal coolant supply - Micro geometry & surface conditioning for optimal chip control - AlCrN for maximum tool life Drills Carbide, 8 x D, R30 N, IK Catalogue Code D335 Discount Group A0210 Material VHM Surface Finish AlCrN Sutton Designation N Geometry R30 - IK Point Type 140° Form C Shank Form (DIN 6535) HA Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials D335 VDI 3323 ISO • 1 P • 2 • 3 • 4 • 5 • 6 • 7 • 8 • 9 • 10 • 11 12 • 13 • 14.1 M 14.2 14.3 • 15 K • 16 • 17 • 18 • 19 • 20 21 N 22 23 24 25 26 27 28 29 30 31 S 32 33 34 35 36 3 7.1 3 7. 2 3 7. 3 3 7. 4 3 7. 5 • Optimal • Effective 3 8.1 H 38.2 3 9.1 39.2 40 41 1150 11.5 162 114 12 D335 1150 1160 11.6 162 114 12 D335 1160 1170 11.7 162 114 12 D335 1170 1180 11.8 162 114 12 D335 1180 1190 11.9 162 114 12 D335 1190 1191 11.91 15/32 162 114 12 D335 1191 1200 12.0 162 114 12 D335 1200 40

14. HA NOTE: HE shanks available, subject to lead time. Drills Carbide, 3 x D, Straight Flute, GG - Suitable for materials up to 1600 N/mm 2 - Rigid twist drill with straight flutes - For drilling hardened or abrasive materials - Straight flutes for increased strength and chip control - TiCN coated for longer tool life Catalogue Code D300 D306 Discount Group A0202 A0206 Material VHM VHM Surface Finish Brt TiCN Sutton Designation GG GG Geometry Straight Flute Straight Flute Point Type 140° Type C (Facet) 140° Type C (Facet) Shank Form (DIN 6535) HA HA Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # Item # P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials D306 D300 VDI 3323 ISO 1 P 2 3 4 5 6 7 8 • • 9 10 • • 11 12 • • 13 14.1 M 14.2 14.3 • • 15 K • • 16 • • 17 • • 18 • • 19 • • 20 21 N 22 • • 23 • • 24 • • 25 • • 26 • • 27 28 29 30 31 S 32 33 34 35 36 3 7.1 3 7. 2 3 7. 3 3 7. 4 3 7. 5 • Optimal • Effective • • 3 8.1 H 38.2 3 9.1 39.2 • • 40 41 1050* 10.5 86 51 10.5 D300 1050 D306 1050 1072* 10.72 27/64 3-3/8 2 27/64 D300 1072 D306 1072 1100 11.0 87 52 11.0 D300 1100 D306 1100 1111 11.11 7/16 3-7/16 2-1/16 7/16 D300 1111 D306 1111 1150* 11.5 90 54 11.5 D300 1150 D306 1150 1151* 11.51 29/64 3-9/16 2-1/8 29/64 D300 1151 D306 1151 1191* 11.91 15/32 3-5/8 2-1/8 15/32 D300 1191 D306 1191 1200 12.0 92 54 12.0 D300 1200 D306 1200 1231* 12.3 31/64 3-11/16 2-3/16 31/64 D300 1231 D306 1231 1269 12.7 1/2 3-3/4 2-1/4 1/2 D300 1269 D306 1269 32

4. HA NOTE: HE shanks available, subject to lead time. - Suitable for materials up to 1400N/mm 2 - Rigid twist drill - Parallel shank - TiN for longer tool life Drills Carbide, 3 x D, R30 Micro Catalogue Code 122160* Discount Group A0202 Material VHM Surface Finish TiN Sutton Designation N Geometry R30 Point Type 118° 4 Facet Form A Shank Form (DIN 6535) HA Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # *Not available once current stock is depleted P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials 122160 VDI 3323 ISO • 1 P • 2 • 3 • 4 • 5 • 6 • 7 • 8 • 9 • 10 • 11 • 12 • 13 14.1 M 14.2 • 14.3 • 15 K • 16 • 17 • 18 • 19 • 20 21 N 22 23 24 25 26 27 28 29 30 31 S 32 33 34 35 • 36 • 3 7.1 • 3 7. 2 3 7. 3 • 3 7. 4 3 7. 5 • Optimal • Effective • 3 8.1 H 38.2 3 9.1 39.2 • 40 41 05 0.5 20 3 0.5 122160 05 06 0.6 21 3.5 0.6 122160 06 07 0.7 23 4.5 0.7 122160 07 08 0.8 24 5 0.8 122160 08 09 0.9 25 5.5 0.9 122160 09 1 1.0 26 6 1 122160 1 11 1.1 28 7 1.1 122160 11 12 1.2 30 8 1.2 122160 12 13 1.3 30 8 1.3 122160 13 14 1.4 32 9 1.4 122160 14 15 1.5 32 9 1.5 122160 15 16 1.6 34 10 1.6 122160 16 17 1.7 34 10 1.7 122160 17 18 1.8 36 11 1.8 122160 18 19 1.9 36 11 1.9 122160 19 2 2.0 38 12 2 122160 2 21 2.1 38 12 2.1 122160 21 22 2.2 40 13 2.2 122160 22 23 2.3 40 13 2.3 122160 23 24 2.4 43 14 2.4 122160 24 25 2.5 43 14 2.5 122160 25 26 2.6 43 14 2.6 122160 26 27 2.7 46 16 2.7 122160 27 28 2.8 46 16 2.8 122160 28 29 2.9 46 16 2.9 122160 29 22

24. NOTE: HE shanks available, subject to lead time. - Used to drill female 60° centre holes in the end of shafts and components, which will later revolve between centres - Designed to maintain accurate centre holes on long production runs - Also used to ensure accurate starting and centring when precision drilling is required - Suitable for materials up to 1600N/mm 2 Drills Carbide, Centre Catalogue Code D318 D319 Discount Group A0202 A0206 Material VHM VHM Surface Finish Brt TiCN Sutton Designation N N Geometry Plain Type Plain Type Point Type 60° Stepped 60° Stepped Shank Form (DIN 6535) HA HA Size Ref. Size d 1 l 1 l 2 d 2 (h6) Item # Item # P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials D319 D318 VDI 3323 ISO • 1 P • 2 • • 3 • • 4 • • 5 • 6 • • 7 • • 8 • 9 • • 10 • 11 • 12 • 13 • • 14.1 M • • 14.2 • • 14.3 • • 15 K • • 16 • • 17 • • 18 • • 19 • • 20 • 21 N • 22 • 23 • 24 • 25 • 26 • 27 • 28 29 30 • 31 S • 32 • 33 • 34 • 35 • 36 • • 3 7.1 • • 3 7. 2 • • 3 7. 3 • • 3 7. 4 • • 3 7. 5 • Optimal • Effective • • 3 8.1 H • • 38.2 • • 3 9.1 • • 39.2 • • 40 • • 41 0001 1 3/64 1-1/4 1/16 1/8 D318 0001 D319 0001 0002 2 5/64 1-7/8 3/32 3/16 D318 0002 D319 0002 0003 3 7/64 2 9/64 1/4 D318 0003 D319 0003 0004 4 1/8 2-1/8 5/32 5/16 D318 0004 D319 0004 0005 5 3/16 2-3/4 1/4 7/16 D318 0005 D319 0005 0006 6 7/32 3 9/32 1/2 D318 0006 D319 0006 42

23. HA NOTE: HE shanks available, subject to lead time. - Ideal for high volume drilling depths to 12 x d 1 without pecking - High self-centring accuracy - Special point geometry with radius cutting tips - Particularly high alignment accuracy due to 4 guidance lands that stabilise the drill at extreme depths - Pilot drilled hole recommended Drills Carbide, 12 x D, R30 UNI, IK Catalogue Code 123300 Discount Group A0202 Material VHM Surface Finish TiAlN Sutton Designation UNI Geometry Internal Coolant Point Type 140° Form A Shank Form (DIN 6535) HA Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials 123300 VDI 3323 ISO • 1 P • 2 • 3 • 4 • 5 • 6 • 7 • 8 9 • 10 11 12 13 • 14.1 M 14.2 14.3 • 15 K • 16 • 17 • 18 • 19 • 20 21 N 22 23 24 25 26 27 28 29 30 31 S 32 33 34 35 36 3 7.1 3 7. 2 3 7. 3 3 7. 4 3 7. 5 • Optimal • Effective 3 8.1 H 38.2 3 9.1 39.2 • 40 41 4 4.0 102 64 6 123300 4 42 4.2 102 64 6 123300 42 45 4.5 102 64 6 123300 45 48 4.8 116 78 6 123300 48 5 5.0 116 78 6 123300 5 55 5.5 116 78 6 123300 55 58 5.8 116 78 6 123300 58 6 6.0 116 78 6 123300 6 63 6.3 146 108 8 123300 63 65 6.5 146 108 8 123300 65 66 6.6 146 108 8 123300 66 68 6.8 146 108 8 123300 68 7 7.0 146 108 8 123300 7 75 7.5 146 108 8 123300 75 78 7.8 146 108 8 123300 78 8 8.0 146 108 8 123300 8 82 8.2 162 120 10 123300 82 85 8.5 162 120 10 123300 85 9 9.0 162 120 10 123300 9 95 9.5 162 120 10 123300 95 98 9.8 162 120 10 123300 98 10 10.0 162 120 10 123300 10 105 10.5 204 156 12 123300 105 11 11.0 204 156 12 123300 11 118 11.8 204 156 12 123300 118 12 12.0 204 156 12 123300 12 125 12.5 230 182 14 123300 125 13 13.0 230 182 14 123300 13 135 13.5 230 182 14 123300 135 14 14.0 230 182 14 123300 14 148 14.8 260 208 16 123300 148 158 15.8 260 208 16 123300 158 16 16.0 260 208 16 123300 16 175 17.5 285 234 18 123300 175 41

12. HA NOTE: HE shanks available, subject to lead time. - Rigid twist drill with slow spiral 15 degree flutes - Suitable for stainless steel, tool steel and high temperature titanium nickel alloys *Not available once current stock is depleted Drills Carbide, 3 x D, R15 NH Catalogue Code D304 D310 Discount Group A0202 A0206 Material VHM VHM Surface Finish Brt TiCN Sutton Designation NH NH Geometry R15 R15 Point Type 135° 4 Facet Form C 135° 4 Facet Form C Shank Form (DIN 6535) HA HA Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # Item # P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials D310 D304 VDI 3323 ISO 1 P 2 • • 3 • • 4 • • 5 6 • • 7 • • 8 • • 9 • • 10 • • 11 • • 12 • • 13 14.1 M • • 14.2 • • 14.3 • • 15 K • • 16 • • 17 • • 18 • • 19 • • 20 • • 21 N • • 22 • • 23 • • 24 • • 25 • • 26 • • 27 • • 28 • • 29 30 31 S 32 33 34 35 36 3 7.1 3 7. 2 3 7. 3 3 7. 4 3 7. 5 • Optimal • Effective • • 3 8.1 H • • 38.2 3 9.1 39.2 • • 40 41 0913* 9.13 23/64 3-1/16 1 -3/4 23/64 D304 0913 D310 0913 0950 9.5 79 46 9.5 D304 0950 D310 0950 0953 9.53 3/8 3-1/8 1 -13/16 3/8 D310 0953 0992* 9.92 25/64 3-1/4 1 -7/8 25/64 D310 0992 1000 10.0 83 48 10.0 D304 1000 D310 1000 1032 10.32 13/32 3-5/16 1 -15/16 13/32 D310 1032 1050 10.5 86 51 10.5 D304 1050 D310 1050 1072* 10.72 27/64 3-3/8 2 27/64 D304 1072 D310 1072 1100 11.0 87 52 11.0 D304 1100 D310 1100 1111 11.11 7/16 3-7/16 2 -1/16 7/16 D310 1111 1150 11.5 90 54 11.5 D304 1150 D310 1150 1151* 11.51 29/64 3-9/16 2 -1/8 29/64 D304 1151 D310 1151 1191 11.91 15/32 3-5/8 2 -1/8 15/32 D310 1191 1200 12.0 92 54 12.0 D304 1200 D310 1200 1231* 12.31 31/64 3-11/16 2 -3/16 31/64 D304 1231 1269 12.7 1/2 3-3/4 2 -1/4 1/2 D310 1269 30

25. 142° 142° 90° 90° NOTE: HE shanks available, subject to lead time. - Precision drill for machine use - Rigid design for “seat” position accuracy - 90° offers hole chamfering & spotting with the one tool - 142° for spotting, matching a typical carbide drill point - Only drill to the depth of the point - Refer to HSS Drill section for HSS Spotting Drills. Drills Carbide, Spotting Catalogue Code D355 D364 D365 D366 Discount Group A0208 A0210 A0208 A0210 Material VHM VHM VHM VHM Surface Finish Brt AlCrN Brt AlCrN Sutton Designation NC NC NC NC Geometry - - - - Point Type 90° 90° Form A 142° Form A 142° Form A Shank Tolerance h9 h9 h9 h9 Size Ref. d 1 (h6) l 1 l 2 d 2 Item # Item # Item # Item # P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials D364 D355 VDI 3323 ISO • 1 P • 2 • • 3 • • 4 • • 5 • 6 • • 7 • • 8 • 9 • • 10 • 11 • 12 • 13 • • 14.1 M • • 14.2 • • 14.3 • • 15 K • • 16 • • 17 • • 18 • • 19 • • 20 • 21 N • 22 • 23 • 24 • 25 • 26 • 27 • 28 • 29 30 • 31 S • 32 • 33 • 34 • 35 • 36 • • 3 7.1 • • 3 7. 2 • • 3 7. 3 • • 3 7. 4 • • 3 7. 5 • Optimal • Effective • 3 8.1 H • • 38.2 • • 3 9.1 • • 39.2 • • 40 • • 41 0300 3.0 46 9 3.0 D355 0300 D364 0300 D365 0300 D366 0300 0400 4.0 55 12 4.0 D355 0400 D364 0400 D365 0400 D366 0400 0500 5.0 62 15 5.0 D355 0500 D364 0500 D365 0500 D366 0500 0600 6.0 66 18 6.0 D355 0600 D364 0600 D365 0600 D366 0600 0800 8.0 79 23 8.0 D355 0800 D364 0800 D365 0800 D366 0800 1000 10.0 89 24 10.0 D355 1000 D364 1000 D365 1000 D366 1000 1200 12.0 102 24 12.0 D355 1200 D364 1200 D365 1200 D366 1200 1600 16.0 115 26 16.0 D355 1600 D364 1600 D365 1600 D366 1600 2000 20.0 131 35 20.0 D355 2000 D364 2000 D365 2000 D366 2000 43

13. HA *Not available once current stock is depleted - Rigid twist drill with straight flutes - Straight flutes for increased strength and chip control - Suitable for cast irons - TiCN coated for longer tool life Drills Carbide, 3 x D, Straight Flute, GG Catalogue Code D300 D306 Discount Group A0202 A0206 Material VHM VHM Surface Finish Brt TiCN Sutton Designation GG GG Geometry Straight Flute Straight Flute Point Type 140° Form C (Facet) 140° Form C (Facet) Shank Form (DIN 6535) HA HA Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # Item # P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials D306 D300 VDI 3323 ISO 1 P 2 3 4 5 6 7 8 • • 9 10 • • 11 12 • • 13 14.1 M 14.2 14.3 • • 15 K • • 16 • • 17 • • 18 • • 19 • • 20 21 N 22 • • 23 • • 24 • • 25 • • 26 • • 27 28 29 30 31 S 32 33 34 35 36 3 7.1 3 7. 2 3 7. 3 3 7. 4 3 7. 5 • Optimal • Effective • • 3 8.1 H 38.2 3 9.1 39.2 • • 40 41 0150 1.5 38 12.7 1.5 D300 0150 D306 0150 0159 1.59 1/16 1-5/8 5/8 1/16 D300 0159 D306 0159 0198* 1.98 5/64 1-11/16 11/16 5/64 D306 0198 0200 2.0 44 19 2.0 D300 0200 D306 0200 0238* 2.38 3/32 1-3/4 3/4 3/32 D300 0238 0250 2.5 46 21 2.5 D300 0250 D306 0250 0300 3.0 48 22 3.0 D300 0300 D306 0300 0318 3.18 1/8 1-7/8 7/8 1/8 D300 0318 D306 0318 0350 3.5 49 24 3.5 D300 0350 D306 0350 0357* 3.57 9/64 1-15/16 15/16 9/64 D306 0357 0397* 3.97 5/32 2-1/16 1-1/16 5/32 D306 0397 0400 4.0 54 27 4.0 D300 0400 D306 0400 0437* 4.37 11/64 2-1/8 1-1/16 11/64 D300 0437 0450 4.5 56 29 4.5 D300 0450 D306 0450 0476 4.76 3/16 2-3/16 1-1/8 3/16 D300 0476 D306 0476 0500 5.0 57 30 5.0 D300 0500 D306 0500 0516* 5.16 13/64 2-1/4 1-3/16 13/64 D300 0516 D306 0516 0550 5.5 60 32 5.5 D300 0550 D306 0550 0556* 5.56 7/32 2-3/8 1-1/4 7/32 D300 0556 D306 0556 0595* 5.95 15/64 2-7/16 1-5/16 15/64 D300 0595 D306 0595 0600 6.0 62 33 6.0 D300 0600 D306 0600 0635 6.35 1/4 2-1/2 1-3/8 1/4 D300 0635 D306 0635 0650 6.5 64 35 6.5 D300 0650 D306 0650 0676* 6.76 17/64 2-5/8 1-7/16 17/64 D300 0676 D306 0676 0700 7.0 68 38 7.0 D300 0700 D306 0700 0714* 7.14 9/32 2-11/16 1-1/2 9/32 D300 0714 D306 0714 0750 7.5 70 40 7.5 D300 0750 D306 0750 0754* 7.54 19/64 2-3/4 1-9/16 19/64 D300 0754 D306 0754 0794 7.94 5/16 2-13/16 1-5/8 5/16 D300 0794 D306 0794 0800 8.0 71 41 8.0 D300 0800 D306 0800 0833* 8.33 21/64 2-15/16 1-11/16 21/64 D300 0833 0850 8.5 76 43 8.5 D300 0850 D306 0850 0873* 8.73 11/32 3 1-11/16 11/32 D300 0873 D306 0873 0900 9.0 78 44 9.0 D300 0900 D306 0900 0913* 9.13 23/64 3-1/16 1-3/4 23/64 D300 0913 0950* 9.5 79 46 9.5 D300 0950 D306 0950 0953 9.53 3/8 3-1/8 1-13/16 3/8 D300 0953 D306 0953 0992* 9.92 25/64 3-1/4 1-7/8 25/64 D300 0992 D306 0992 1000 10.0 83 48 10.0 D300 1000 D306 1000 1032* 10.32 13/32 3-5/16 1-15/16 13/32 D300 1032 D306 1032 31

16. HA NOTE: HE shanks available, subject to lead time. *Available on request as special manufacture, subject to lead time. Catalogue Code D326 Discount Group A0210 Material VHM Surface Finish AlCrN Sutton Designation N Geometry R30 Point Type 140° Form C Shank Form (DIN 6535) HA Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # - Suitable for materials up to 1400N/mm 2 - Strong core - Micro geometry & surface conditioning for optimal chip control - AlCrN for maximum tool life Drills Carbide, 5 x D, R30 N P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials D326 VDI 3323 ISO • 1 P • 2 • 3 • 4 • 5 • 6 • 7 • 8 • 9 • 10 • 11 12 • 13 14.1 M 14.2 • 14.3 • 15 K • 16 • 17 • 18 • 19 • 20 21 N 22 23 24 25 26 27 28 29 30 31 S 32 33 34 35 • 36 • 3 7.1 • 3 7. 2 3 7. 3 • 3 7. 4 3 7. 5 • Optimal • Effective • 3 8.1 H 38.2 3 9.1 39.2 • 40 41 0970 9.7 103 61 10 D326 0970 0980 9.8 103 61 10 D326 0980 0990 9.9 103 61 10 D326 0990 0992 9.92 25/64 103 61 10 D326 0992 1000 10.0 103 61 10 D326 1000 1010 10.1 118 71 12 D326 1010 1020 10.2 118 71 12 D326 1020 1030 10.3 118 71 12 D326 1030 1032 10.32 13/32 118 71 12 D326 1032 1040 10.4 118 71 12 D326 1040 1050 10.5 118 71 12 D326 1050 1060 10.6 118 71 12 D326 1060 1070 10.7 118 71 12 D326 1070 1080 10.8 118 71 12 D326 1080 1090 10.9 118 71 12 D326 1090 1100 11.0 118 71 12 D326 1100 1110 11.1 118 71 12 D326 1110 1111 11.11 7/16 118 71 12 D326 1111 1120 11.2 118 71 12 D326 1120 1130 11.3 118 71 12 D326 1130 1140 11.4 118 71 12 D326 1140 1150 11.5 118 71 12 D326 1150 1160 11.6 118 71 12 D326 1160 1170 11.7 118 71 12 D326 1170 1180 11.8 118 71 12 D326 1180 1190 11.9 118 71 12 D326 1190 1191 11.91 15/32 118 71 12 D326 1191 1200 12.0 118 71 12 D326 1200 1250 12.5 124 77 14 D326 1250 1269 12.7 1/2 124 77 14 D326 1269 1280 12.8 124 77 14 D326 1280 1300 13.0 124 77 14 D326 1300 1349 13.49 17/32 124 77 14 D326 1349 1350 13.5 124 77 14 D326 1350 1380 13.8 124 77 14 D326 1380 1400 14.0 124 77 14 D326 1400 1429 14.29 9/16 133 83 16 D326 1429 1450 14.5 133 83 16 D326 1450 1480 14.8 133 83 16 D326 1480 1500 15.0 133 83 16 D326 1500 1550 15.5 133 83 16 D326 1550 1580 15.8 133 83 16 D326 1580 1588 15.88 5/8 133 83 16 D326 1588 1600 16.0 133 83 16 D326 1600 1650 16.5 143 93 18 D326 1650 1680 16.8 143 93 18 D326 1680 1700 17.0 143 93 18 D326 1700 1746 17.46 11/16 143 93 18 D326 1746 1750 17.5 143 93 18 D326 1750 1780 17.8 143 93 18 D326 1780 1800 18.0 143 93 18 D326 1800 1850 18.5 153 101 20 D326 1850 1900 19.0 153 101 20 D326 1900 1905 19.05 3/4 153 101 20 D326 1905 1950 19.5 153 101 20 D326 1950 1980 19.8 153 101 20 • 2000 20.0 153 101 20 D326 2000 34

11. HA NOTE: HE shanks available, subject to lead time. - Rigid twist drill with slow spiral 15 degree flutes - Suitable for harder steel, tool steel and cast iron *Not available once current stock is depleted Drills Carbide, 3 x D, R15 NH Catalogue Code D304 D310 Discount Group A0202 A0206 Material VHM VHM Surface Finish Brt TiCN Sutton Designation NH NH Geometry R15 R15 Point Type 135° 4 Facet Form C 135° 4 Facet Form C Shank Form (DIN 6535) HA HA Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # Item # P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials D310 D304 VDI 3323 ISO 1 P 2 • • 3 • • 4 • • 5 6 • • 7 • • 8 • • 9 • • 10 • • 11 • • 12 • • 13 14.1 M • • 14.2 • • 14.3 • • 15 K • • 16 • • 17 • • 18 • • 19 • • 20 • • 21 N • • 22 • • 23 • • 24 • • 25 • • 26 • • 27 • • 28 • • 29 30 31 S 32 33 34 35 36 3 7.1 3 7. 2 3 7. 3 3 7. 4 3 7. 5 • Optimal • Effective • • 3 8.1 H • • 38.2 3 9.1 39.2 • • 40 41 0100 1.0 38 13 1.0 D304 0100 D310 0100 0119* 1.19 3/64 1-5/8 5/8 3/64 D310 0119 0150 1.5 38 13 1.5 D304 0150 D310 0150 0159 1.59 1/16 1-5/8 5/8 1/16 D310 0159 0160 1.6 43 18 1.6 D304 0160 D310 0160 0198* 1.98 5/64 1-11/16 11/64 5/64 D304 0198 D310 0198 0200 2.0 44 19 2.0 D304 0200 D310 0200 0238 2.38 3/32 1-3/4 3/4 3/32 D310 0238 0250 2.5 46 21 2.5 D304 0250 D310 0250 0278* 2.78 7/64 1-13/16 13/16 7/64 D310 0278 0300 3.0 48 22 3.0 D304 0300 D310 0300 0318 3.18 1/8 1-7/8 7/8 1/8 D310 0318 0330 3.3 52 24 3.3 D304 0330 D310 0330 0350 3.5 52 24 3.5 D304 0350 D310 0350 0357* 3.57 9/64 1-15/16 15/16 9/64 D304 0357 D310 0357 0397 3.97 5/32 2-1/16 1 -1/16 5/32 D310 0397 0400 4.0 53 27 4.0 D304 0400 D310 0400 0420 4.2 53 27 4.2 D304 0420 D310 0420 0437* 4.37 11/64 2-1/8 1 -1/16 11/64 D310 0437 0450 4.5 56 29 4.5 D304 0450 D310 0450 0476 4.76 3/16 2-3/16 1 -1/8 3/16 D310 0476 0500 5.0 57 30 5.0 D304 0500 D310 0500 0516* 5.16 13/64 2-1/4 1 -3/16 13/64 D310 0516 0550 5.5 60 32 5.5 D304 0550 D310 0550 0556 5.56 7/32 2-3/8 1 -1/4 7/32 D310 0556 0595* 5.95 15/64 2-7/16 1 -5/16 15/64 D304 0595 0600 6.0 62 33 6.0 D304 0600 D310 0600 0635* 6.35 1/4 2-1/2 1 -3/8 1/4 D304 0635 D310 0635 0650 6.5 64 35 6.5 D304 0650 D310 0650 0680 6.8 68 38 6.8 D304 0680 D310 0680 0700 7.0 68 38 7.0 D304 0700 D310 0700 0714 7.14 9/32 2-11/16 1 -1/2 9/32 D310 0714 0750 7.5 70 40 7.5 D304 0750 D310 0750 0754* 7.54 19/64 2-3/4 1 -9/16 19/64 D304 0754 D310 0754 0794 7.94 5/16 2-13/16 1 -5/8 5/16 D310 0794 0800 8.0 71 41 8.0 D304 0800 D310 0800 0833* 8.33 21/64 2-15/16 1 -11/16 21/64 D304 0833 0850 8.5 76 43 8.5 D304 0850 D310 0850 0873 8.73 11/32 3 1 -11/16 11/32 D310 0873 0900 9.0 78 44 9.0 D304 0900 D310 0900 29

6. HA NOTE: HE shanks available, subject to lead time. - Suitable for materials up to 1400N/mm 2 - Strong core - Micro geometry & surface conditioning for optimal chip control - AlCrN for maximum tool life Drills Carbide, 3 x D, R30 N Catalogue Code D323 Discount Group A0210 Material VHM Surface Finish AlCrN Sutton Designation N Geometry R30 Point Type 140° Form C Shank Form (DIN 6535) HA Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials D323 VDI 3323 ISO • 1 P • 2 • 3 • 4 • 5 • 6 • 7 • 8 • 9 • 10 • 11 12 • 13 14.1 M 14.2 • 14.3 • 15 K • 16 • 17 • 18 • 19 • 20 21 N 22 23 24 25 26 27 28 29 30 31 S 32 33 34 35 • 36 • 3 7.1 • 3 7. 2 3 7. 3 • 3 7. 4 3 7. 5 • Optimal • Effective • 3 8.1 H 38.2 3 9.1 39.2 • 40 41 0940 9.4 89 47 10 D323 0940 0950 9.5 89 47 10 D323 0950 0953 9.53 3/8 89 47 10 D323 0953 0960 9.6 89 47 10 D323 0960 0970 9.7 89 47 10 D323 0970 0980 9.8 89 47 10 D323 0980 0990 9.9 89 47 10 D323 0990 0992 9.92 25/64 89 47 10 D323 0992 1000 10.0 89 47 10 D323 1000 1010 10.1 102 55 12 D323 1010 1020 10.2 102 55 12 D323 1020 1030 10.3 102 55 12 D323 1030 1032 10.32 13/32 102 55 12 D323 1032 1040 10.4 102 55 12 D323 1040 1050 10.5 102 55 12 D323 1050 1060 10.6 102 55 12 D323 1060 1070 10.7 102 55 12 D323 1070 1080 10.8 102 55 12 D323 1080 1090 10.9 102 55 12 D323 1090 1100 11.0 102 55 12 D323 1100 1110 11.1 102 55 12 D323 1110 1111 11.11 7/16 102 55 12 D323 1111 1120 11.2 102 55 12 D323 1120 1130 11.3 102 55 12 D323 1130 1140 11.4 102 55 12 D323 1140 1150 11.5 102 55 12 D323 1150 1160 11.6 102 55 12 D323 1160 1170 11.7 102 55 12 D323 1170 1180 11.8 102 55 12 D323 1180 1190 11.9 102 55 12 D323 1190 1191 11.91 15/32 102 55 12 D323 1191 1200 12.0 102 55 12 D323 1200 1250 12.5 107 60 14 D323 1250 1269 12.7 1/2 107 60 14 D323 1269 1280 12.8 107 60 14 D323 1280 1300 13.0 107 60 14 D323 1300 1349 13.49 17/32 107 60 14 D323 1349 1350 13.5 107 60 14 D323 1350 1380 13.8 107 60 14 D323 1380 1400 14.0 107 60 14 D323 1400 1429 14.29 9/16 115 65 16 D323 1429 1450 14.5 115 65 16 D323 1450 1480 14.8 115 65 16 D323 1480 1500 15.0 115 65 16 D323 1500 1550 15.5 115 65 16 D323 1550 1580 15.8 115 65 16 D323 1580 1588 15.88 5/8 115 65 16 D323 1588 1600 16.0 115 65 16 D323 1600 1650 16.5 123 73 18 D323 1650 1680 16.8 123 73 18 D323 1680 1700 17.0 123 73 18 D323 1700 1746 17.46 11/16 123 73 18 D323 1746 1750 17.5 123 73 18 D323 1750 1780 17.8 123 73 18 D323 1780 1800 18.0 123 73 18 D323 1800 1850 18.5 131 79 20 D323 1850 1900 19.0 131 79 20 D323 1900 1905 19.05 3/4 131 79 20 D323 1905 1950 19.5 131 79 20 D323 1950 2000 20.0 131 79 20 D323 2000 24

8. HA NOTE: HE shanks available, subject to lead time. Catalogue Code D329 Discount Group A0210 Material VHM Surface Finish AlCrN Sutton Designation N Geometry R30 - IK Point Type 140° Form C Shank Form (DIN 6535) HA Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # - Suitable for materials up to 1400N/mm 2 - Strong core with internal coolant supply - Micro geometry & surface conditioning for optimal chip control - AlCrN for maximum tool life Drills Carbide, 3 x D, R30 N, IK P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials D329 VDI 3323 ISO • 1 P • 2 • 3 • 4 • 5 • 6 • 7 • 8 • 9 • 10 • 11 • 12 • 13 • 14.1 M • 14.2 • 14.3 • 15 K • 16 • 17 • 18 • 19 • 20 21 N 22 23 24 • 25 • 26 • 27 • 28 29 30 • 31 S • 32 • 33 • 34 • 35 • 36 • 3 7.1 • 3 7. 2 • 3 7. 3 • 3 7. 4 • 3 7. 5 • Optimal • Effective • 3 8.1 H 38.2 3 9.1 39.2 • 40 41 0940 9.4 89 47 10 D329 0940 0950 9.5 89 47 10 D329 0950 0953 9.53 3/8 89 47 10 D329 0953 0960 9.6 89 47 10 D329 0960 0970 9.7 89 47 10 D329 0970 0980 9.8 89 47 10 D329 0980 0990 9.9 89 47 10 D329 0990 0992 9.92 25/64 89 47 10 D329 0992 1000 10.0 89 47 10 D329 1000 1010 10.1 102 55 12 D329 1010 1020 10.2 102 55 12 D329 1020 1030 10.3 102 55 12 D329 1030 1032 10.32 13/32 102 55 12 D329 1032 1040 10.4 102 55 12 D329 1040 1050 10.5 102 55 12 D329 1050 1060 10.6 102 55 12 D329 1060 1070 10.7 102 55 12 D329 1070 1080 10.8 102 55 12 D329 1080 1090 10.9 102 55 12 D329 1090 1100 11.0 102 55 12 D329 1100 1110 11.1 102 55 12 D329 1110 1111 11.11 7/16 102 55 12 D329 1111 1120 11.2 102 55 12 D329 1120 1130 11.3 102 55 12 D329 1130 1140 11.4 102 55 12 D329 1140 1150 11.5 102 55 12 D329 1150 1160 11.6 102 55 12 D329 1160 1170 11.7 102 55 12 D329 1170 1180 11.8 102 55 12 D329 1180 1190 11.9 102 55 12 D329 1190 1191 11.91 15/32 102 55 12 D329 1191 1200 12.0 102 55 12 D329 1200 1250 12.5 107 60 14 D329 1250 1269 12.7 1/2 107 60 14 D329 1269 1280 12.8 107 60 14 D329 1280 1300 13.0 107 60 14 D329 1300 1349 13.49 17/32 107 60 14 D329 1349 1350 13.5 107 60 14 D329 1350 1380 13.8 107 60 14 • 1400 14.0 107 60 14 D329 1400 1429 14.29 9/16 115 65 16 D329 1429 1450 14.5 115 65 16 D329 1450 1480 14.8 115 65 16 • 1500 15.0 115 65 16 D329 1500 1550 15.5 115 65 16 D329 1550 1580 15.8 115 65 16 • 1588 15.88 5/8 115 65 16 D329 1588 1600 16.0 115 65 16 D329 1600 1650 16.5 123 73 18 D329 1650 1700 17.0 123 73 18 D329 1700 1746 17.46 11/16 123 73 18 D329 1746 1750 17.5 123 73 18 D329 1750 1800 18.0 123 73 18 D329 1800 1850 18.5 131 79 20 D329 1850 1900 19.0 131 79 20 D329 1900 1905 19.05 3/4 131 79 20 D329 1905 1950 19.5 131 79 20 D329 1950 2000 20.0 131 79 20 D329 2000 26

20. HA NOTE: HE shanks available, subject to lead time. - Excellent solution for stainless steels and difficult super alloy type materials - Optimised geometry ensures no work hardening and high productivity - HELICA for outstanding oxidation resistance and hot hardness Drills Carbide 5 x D, R30 VA Black Magic Catalogue Code D358 Discount Group A0210 Material VHM Surface Finish HELICA Sutton Designation VA Geometry R30 - IK Point Type 140° 4 Facet Form C Shank Form (DIN 6535) HA Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials D358 VDI 3323 ISO • 1 P • 2 • 3 • 4 • 5 • 6 • 7 • 8 9 • 10 11 • 12 • 13 • 14.1 M • 14.2 • 14.3 15 K 16 17 18 19 20 • 21 N • 22 • 23 • 24 • 25 26 27 28 29 30 • 31 S • 32 • 33 • 34 • 35 • 36 • 3 7.1 • 3 7. 2 • 3 7. 3 • 3 7. 4 • 3 7. 5 • Optimal • Effective 3 8.1 H 38.2 3 9.1 39.2 40 41 0940 9.4 103 61 10 D358 0940 0950 9.5 103 61 10 D358 0950 0953 9.53 3/8 103 61 10 D358 0953 0960 9.6 103 61 10 D358 0960 0970 9.7 103 61 10 D358 0970 0980 9.8 103 61 10 D358 0980 0990 9.9 103 61 10 D358 0990 0992 9.92 25/64 103 61 10 D358 0992 1000 10.0 103 61 10 D358 1000 1010 10.1 118 71 12 D358 1010 1020 10.2 118 71 12 D358 1020 1030 10.3 118 71 12 D358 1030 1032 10.32 13/32 118 71 12 D358 1032 1040 10.4 118 71 12 D358 1040 1050 10.5 118 71 12 D358 1050 1060 10.6 118 71 12 D358 1060 1070 10.7 118 71 12 D358 1070 1072 10.72 27/64 118 71 12 D358 1072 1080 10.8 118 71 12 D358 1080 1090 10.9 118 71 12 D358 1090 1100 11.0 118 71 12 D358 1100 1110 11.1 118 71 12 D358 1110 1111 11.11 7/16 118 71 12 D358 1111 1120 11.2 118 71 12 D358 1120 1130 11.3 118 71 12 D358 1130 1140 11.4 118 71 12 D358 1140 1150 11.5 118 71 12 D358 1150 1151 11.51 29/64 118 71 12 D358 1151 1160 11.6 118 71 12 D358 1160 1170 11.7 118 71 12 D358 1170 1180 11.8 118 71 12 D358 1180 1190 11.9 118 71 12 D358 1190 1191 11.91 15/32 118 71 12 D358 1191 1200 12.0 118 71 12 D358 1200 1231 12.31 31/64 124 77 14 D358 1231 1250 12.5 124 77 14 D358 1250 1269 12.7 1/2 124 77 14 D358 1269 1280 12.8 124 77 14 D358 1280 1300 13.0 124 77 14 D358 1300 1310 13.10 33/64 124 77 14 D358 1310 1349 13.49 17/32 124 77 14 D358 1349 1350 13.5 124 77 14 D358 1350 1389 13.89 35/64 124 77 14 D358 1389 1400 14.0 124 77 14 D358 1400 1429 14.29 9/16 133 83 16 D358 1429 1450 14.5 133 83 16 D358 1450 1468 14.68 37/64 133 83 16 D358 1468 1500 15.0 133 83 16 D358 1500 1508 15.08 19/32 133 83 16 D358 1508 1548 15.48 39/64 133 83 16 D358 1548 1550 15.5 133 83 16 D358 1550 1588 15.88 5/8 133 83 16 D358 1588 1600 16.0 133 83 16 D358 1600 1650 16.5 143 93 18 D358 1650 1667 16.67 21/32 143 93 18 D358 1667 1700 17.0 143 93 18 D358 1700 1746 17.46 11/16 143 93 18 D358 1746 1750 17.5 143 93 18 D358 1750 1800 18.0 143 93 18 D358 1800 1826 18.26 23/32 153 101 20 D358 1826 1850 18.5 153 101 20 D358 1850 1900 19.0 153 101 20 D358 1900 1905 19.05 3/4 153 101 20 D358 1905 1950 19.5 153 101 20 D358 1950 2000 20.0 153 101 20 D358 2000 38

10. HA NOTE: HE shanks available, subject to lead time. - Excellent solution for stainless steels and difficult super alloy type materials - Optimised geometry ensures no work hardening and high productivity - HELICA for outstanding oxidation resistance and hot hardness Drills Carbide 3 x D, R30 VA Black Magic Catalogue Code D356 Discount Group A0210 Material VHM Surface Finish HELICA Sutton Designation VA Geometry R30 - IK Point Type 140° 4 Facet Form C Shank Form (DIN 6535) HA Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials D356 VDI 3323 ISO • 1 P • 2 • 3 • 4 • 5 • 6 • 7 • 8 9 • 10 11 • 12 • 13 • 14.1 M • 14.2 • 14.3 15 K 16 17 18 19 20 • 21 N • 22 • 23 • 24 • 25 26 27 28 29 30 • 31 S • 32 • 33 • 34 • 35 • 36 • 3 7.1 • 3 7. 2 • 3 7. 3 • 3 7. 4 • 3 7. 5 • Optimal • Effective 3 8.1 H 38.2 3 9.1 39.2 40 41 0940 9.4 89 47 10 D356 0940 0950 9.5 89 47 10 D356 0950 0953 9.53 3/8 89 47 10 D356 0953 0960 9.6 89 47 10 D356 0960 0970 9.7 89 47 10 D356 0970 0980 9.8 89 47 10 D356 0980 0990 9.9 89 47 10 D356 0990 0992 9.92 25/64 89 47 10 D356 0992 1000 10.0 89 47 10 D356 1000 1010 10.1 102 55 12 D356 1010 1020 10.2 102 55 12 D356 1020 1030 10.3 102 55 12 D356 1030 1032 10.32 13/32 102 55 12 D356 1032 1040 10.4 102 55 12 D356 1040 1050 10.5 102 55 12 D356 1050 1060 10.6 102 55 12 D356 1060 1070 10.7 102 55 12 D356 1070 1072 10.72 27/64 102 55 12 D356 1072 1080 10.8 102 55 12 D356 1080 1090 10.9 102 55 12 D356 1090 1100 11.0 102 55 12 D356 1100 1110 11.1 102 55 12 D356 1110 1111 11.11 7/16 102 55 12 D356 1111 1120 11.2 102 55 12 D356 1120 1130 11.3 102 55 12 D356 1130 1140 11.4 102 55 12 D356 1140 1150 11.5 102 55 12 D356 1150 1151 11.51 29/64 102 55 12 D356 1151 1160 11.6 102 55 12 D356 1160 1170 11.7 102 55 12 D356 1170 1180 11.8 102 55 12 D356 1180 1190 11.9 102 55 12 D356 1190 1191 11.91 15/32 102 55 12 D356 1191 1200 12.0 102 55 12 D356 1200 1231 12.30 31/64 107 60 14 D356 1231 1250 12.5 107 60 14 D356 1250 1269 12.7 1/2 107 60 14 D356 1269 1280 12.8 107 60 14 D356 1280 1300 13.0 107 60 14 D356 1300 1310 13.10 33/64 107 60 14 D356 1310 1349 13.49 17/32 107 60 14 D356 1349 1350 13.5 107 60 14 D356 1350 1389 13.89 35/64 107 60 14 D356 1389 1400 14.0 107 60 14 D356 1400 1429 14.29 9/16 115 65 16 D356 1429 1450 14.5 115 65 16 D356 1450 1468 14.68 37/64 115 65 16 D356 1468 1500 15.0 115 65 16 D356 1500 1508 15.08 19/32 115 65 16 D356 1508 1548 15.48 39/64 115 65 16 D356 1548 1550 15.5 115 65 16 D356 1550 1588 15.88 5/8 115 65 16 D356 1588 1600 16.0 115 65 16 D356 1600 1650 16.5 123 73 18 D356 1650 1667 16.67 21/32 123 73 18 D356 1667 1700 17.0 123 73 18 D356 1700 1746 17.46 11/16 123 73 18 D356 1746 1750 17.5 123 73 18 D356 1750 1800 18.0 123 73 18 D356 1800 1826 18.26 23/32 131 79 20 D356 1826 1850 18.5 131 79 20 D356 1850 1900 19.0 131 79 20 D356 1900 1905 19.05 3/4 131 79 20 D356 1905 1950 19.5 131 79 20 D356 1950 2000 20.0 131 79 20 D356 2000 28

18. HA NOTE: HE shanks available, subject to lead time. *Available on request as special manufacture, subject to lead time. - Suitable for materials up to 1400N/mm 2 - Strong core with internal coolant supply - Micro geometry & surface conditioning for optimal chip control - AlCrN for maximum tool life Drills Carbide, 5 x D, R30 N, IK Catalogue Code D332 Discount Group A0210 Material VHM Surface Finish AlCrN Sutton Designation N Geometry R30 - IK Point Type 140° Form C Shank Form (DIN 6535) HA Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials D332 VDI 3323 ISO • 1 P • 2 • 3 • 4 • 5 • 6 • 7 • 8 • 9 • 10 • 11 • 12 • 13 • 14.1 M • 14.2 • 14.3 • 15 K • 16 • 17 • 18 • 19 • 20 21 N 22 23 24 • 25 • 26 • 27 • 28 29 30 • 31 S • 32 • 33 • 34 • 35 • 36 • 3 7.1 • 3 7. 2 • 3 7. 3 • 3 7. 4 • 3 7. 5 • Optimal • Effective • 3 8.1 H 38.2 3 9.1 39.2 • 40 41 0940 9.4 103 61 10 D332 0940 0950 9.5 103 61 10 D332 0950 0953 9.53 3/8 103 61 10 D332 0953 0960 9.6 103 61 10 D332 0960 0970 9.7 103 61 10 D332 0970 0980 9.8 103 61 10 D332 0980 0990 9.9 103 61 10 D332 0990 0992 9.92 25/64 103 61 10 D332 0992 1000 10.0 103 61 10 D332 1000 1010 10.1 118 71 12 D332 1010 1020 10.2 118 71 12 D332 1020 1030 10.3 118 71 12 D332 1030 1032 10.32 13/32 118 71 12 D332 1032 1040 10.4 118 71 12 D332 1040 1050 10.5 118 71 12 D332 1050 1060 10.6 118 71 12 D332 1060 1070 10.7 118 71 12 D332 1070 1080 10.8 118 71 12 D332 1080 1090 10.9 118 71 12 D332 1090 1100 11.0 118 71 12 D332 1100 1110 11.1 118 71 12 D332 1110 1111 11.11 7/16 118 71 12 D332 1111 1120 11.2 118 71 12 D332 1120 1130 11.3 118 71 12 D332 1130 1140 11.4 118 71 12 D332 1140 1150 11.5 118 71 12 D332 1150 1160 11.6 118 71 12 D332 1160 1170 11.7 118 71 12 D332 1170 1180 11.8 118 71 12 D332 1180 1190 11.9 118 71 12 D332 1190 1191 11.91 15/32 118 71 12 D332 1191 1200 12.0 118 71 12 D332 1200 1250 12.5 124 77 14 D332 1250 1269 12.7 1/2 124 77 14 D332 1269 1280 12.8 124 77 14 D332 1280 1300 13.0 124 77 14 D332 1300 1349 13.49 17/32 124 77 14 D332 1349 1350 13.5 124 77 14 D332 1350 1380 13.8 124 77 14 • 1400 14.0 124 77 14 D332 1400 1429 14.29 9/16 133 83 16 D332 1429 1450 14.5 133 83 16 D332 1450 1480 14.8 133 83 16 • 1500 15.0 133 83 16 D332 1500 1550 15.5 133 83 16 D332 1550 1580 15.8 133 83 16 • 1588 15.88 5/8 133 83 16 D332 1588 1600 16.0 133 83 16 D332 1600 1650 16.5 143 93 18 D332 1650 1680 16.8 143 93 18 • 1700 17.0 143 93 18 D332 1700 1746 17.46 11/16 143 93 18 D332 1746 1750 17.5 143 93 18 D332 1750 1780 17.8 143 93 18 • 1800 18.0 143 93 18 D332 1800 1850 18.5 153 101 20 D332 1850 1900 19.0 153 101 20 D332 1900 1905 19.05 3/4 153 101 20 D332 1905 1950 19.5 153 101 20 D332 1950 1980 19.8 153 101 20 • 2000 20.0 153 101 20 D332 2000 36

21. HA NOTE: HE shanks available, subject to lead time. - Suitable for materials up to 1400N/mm 2 - Strong core with internal coolant supply - Micro geometry & surface conditioning for optimal chip control - AlCrN for maximum tool life Drills Carbide, 8 x D, R30 N, IK Catalogue Code D335 Discount Group A0210 Material VHM Surface Finish AlCrN Sutton Designation N Geometry R30 - IK Point Type 140° Form C Shank Form (DIN 6535) HA Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials D335 VDI 3323 ISO • 1 P • 2 • 3 • 4 • 5 • 6 • 7 • 8 • 9 • 10 • 11 12 • 13 • 14.1 M 14.2 14.3 • 15 K • 16 • 17 • 18 • 19 • 20 21 N 22 23 24 25 26 27 28 29 30 31 S 32 33 34 35 36 3 7.1 3 7. 2 3 7. 3 3 7. 4 3 7. 5 • Optimal • Effective 3 8.1 H 38.2 3 9.1 39.2 40 41 0500 5.0 95 57 6 D335 0500 0510 5.1 95 57 6 D335 0510 0516 5.16 13/64 95 57 6 D335 0516 0520 5.2 95 57 6 D335 0520 0530 5.3 95 57 6 D335 0530 0540 5.4 95 57 6 D335 0540 0550 5.5 95 57 6 D335 0550 0556 5.56 7/32 95 57 6 D335 0556 0560 5.6 95 57 6 D335 0560 0570 5.7 95 57 6 D335 0570 0580 5.8 95 57 6 D335 0580 0590 5.9 95 57 6 D335 0590 0595 5.95 15/64 95 57 6 D335 0595 0600 6.0 95 57 6 D335 0600 0610 6.1 114 76 8 D335 0610 0620 6.2 114 76 8 D335 0620 0630 6.3 114 76 8 D335 0630 0635 6.35 1/4 114 76 8 D335 0635 0640 6.4 114 76 8 D335 0640 0650 6.5 114 76 8 D335 0650 0660 6.6 114 76 8 D335 0660 0670 6.7 114 76 8 D335 0670 0676 6.76 17/64 114 76 8 D335 0676 0680 6.8 114 76 8 D335 0680 0690 6.9 114 76 8 D335 0690 0700 7.0 114 76 8 D335 0700 0710 7.1 114 76 8 D335 0710 0714 7.14 9/32 114 76 8 D335 0714 0720 7.2 114 76 8 D335 0720 0730 7.3 114 76 8 D335 0730 0740 7.4 114 76 8 D335 0740 0750 7.5 114 76 8 D335 0750 0754 7.54 19/64 114 76 8 D335 0754 0760 7.6 114 76 8 D335 0760 0770 7.7 114 76 8 D335 0770 0780 7.8 114 76 8 D335 0780 0790 7.9 114 76 8 D335 0790 0794 7.94 5/16 114 76 8 D335 0794 0800 8.0 114 76 8 D335 0800 0810 8.1 142 95 10 D335 0810 0820 8.2 142 95 10 D335 0820 0830 8.3 142 95 10 D335 0830 0833 8.33 21/64 142 95 10 D335 0833 0840 8.4 142 95 10 D335 0840 0850 8.5 142 95 10 D335 0850 0860 8.6 142 95 10 D335 0860 0870 8.7 142 95 10 D335 0870 0873 8.73 11/32 142 95 10 D335 0873 0880 8.8 142 95 10 D335 0880 0890 8.9 142 95 10 D335 0890 0900 9.0 142 95 10 D335 0900 0910 9.1 142 95 10 D335 0910 0913 9.13 23/64 142 95 10 D335 0913 0920 9.2 142 95 10 D335 0920 0930 9.3 142 95 10 D335 0930 0940 9.4 142 95 10 D335 0940 0950 9.5 142 95 10 D335 0950 0953 9.53 3/8 142 95 10 D335 0953 0960 9.6 142 95 10 D335 0960 0970 9.7 142 95 10 D335 0970 0980 9.8 142 95 10 D335 0980 0990 9.9 142 95 10 D335 0990 0992 9.92 25/64 142 95 10 D335 0992 1000 10.0 142 95 10 D335 1000 1010 10.1 162 114 12 D335 1010 1020 10.2 162 114 12 D335 1020 1030 10.3 162 114 12 D335 1030 1032 10.32 13/32 162 114 12 D335 1032 1040 10.4 162 114 12 D335 1040 1050 10.5 162 114 12 D335 1050 1060 10.6 162 114 12 D335 1060 1070 10.7 162 114 12 D335 1070 1080 10.8 162 114 12 D335 1080 1090 10.9 162 114 12 D335 1090 1100 11.0 162 114 12 D335 1100 1110 11.1 162 114 12 D335 1110 1111 11.11 7/16 162 114 12 D335 1111 1120 11.2 162 114 12 D335 1120 1130 11.3 162 114 12 D335 1130 1140 11.4 162 114 12 D335 1140 39

5. HA NOTE: HE shanks available, subject to lead time. - Suitable for materials up to 1400N/mm 2 - Strong core - Micro geometry & surface conditioning for optimal chip control - AlCrN for maximum tool life Catalogue Code D323 Discount Group A0210 Material VHM Surface Finish AlCrN Sutton Designation N Geometry R30 Point Type 140° Form C Shank Form (DIN 6535) HA Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # Drills Carbide, 3 x D, R30 N P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials D323 VDI 3323 ISO • 1 P • 2 • 3 • 4 • 5 • 6 • 7 • 8 • 9 • 10 • 11 12 • 13 14.1 M 14.2 • 14.3 • 15 K • 16 • 17 • 18 • 19 • 20 21 N 22 23 24 25 26 27 28 29 30 31 S 32 33 34 35 • 36 • 3 7.1 • 3 7. 2 3 7. 3 • 3 7. 4 3 7. 5 • Optimal • Effective • 3 8.1 H 38.2 3 9.1 39.2 • 40 41 0300 3.0 62 20 6 D323 0300 0310 3.1 62 20 6 D323 0310 0318 3.18 1/8 62 20 6 D323 0318 0320 3.2 62 20 6 D323 0320 0330 3.3 62 20 6 D323 0330 0340 3.4 62 20 6 D323 0340 0350 3.5 62 20 6 D323 0350 0357 3.57 9/64 62 20 6 D323 0357 0360 3.6 62 20 6 D323 0360 0370 3.7 62 20 6 D323 0370 0380 3.8 66 24 6 D323 0380 0390 3.9 66 24 6 D323 0390 0397 3.97 5/32 66 24 6 D323 0397 0400 4.0 66 24 6 D323 0400 0410 4.1 66 24 6 D323 0410 0420 4.2 66 24 6 D323 0420 0430 4.3 66 24 6 D323 0430 0437 4.37 11/64 66 24 6 D323 0437 0440 4.4 66 24 6 D323 0440 0450 4.5 66 24 6 D323 0450 0460 4.6 66 24 6 D323 0460 0470 4.7 66 24 6 D323 0470 0476 4.76 3/16 66 24 6 D323 0476 0480 4.8 66 28 6 D323 0480 0490 4.9 66 28 6 D323 0490 0500 5.0 66 28 6 D323 0500 0510 5.1 66 28 6 D323 0510 0516 5.16 13/64 66 28 6 D323 0516 0520 5.2 66 28 6 D323 0520 0530 5.3 66 28 6 D323 0530 0540 5.4 66 28 6 D323 0540 0550 5.5 66 28 6 D323 0550 0556 5.56 7/32 66 28 6 D323 0556 0560 5.6 66 28 6 D323 0560 0570 5.7 66 28 6 D323 0570 0580 5.8 66 28 6 D323 0580 0590 5.9 66 28 6 D323 0590 0595 5.95 15/64 66 28 6 D323 0595 0600 6.0 66 28 6 D323 0600 0610 6.1 79 34 8 D323 0610 0620 6.2 79 34 8 D323 0620 0630 6.3 79 34 8 D323 0630 0635 6.35 1/4 79 34 8 D323 0635 0640 6.4 79 34 8 D323 0640 0650 6.5 79 34 8 D323 0650 0660 6.6 79 34 8 D323 0660 0670 6.7 79 34 8 D323 0670 0676 6.76 17/64 79 34 8 D323 0676 0680 6.8 79 34 8 D323 0680 0690 6.9 79 34 8 D323 0690 0700 7.0 79 34 8 D323 0700 0710 7.1 79 41 8 D323 0710 0714 7.14 9/32 79 41 8 D323 0714 0720 7.2 79 41 8 D323 0720 0730 7.3 79 41 8 D323 0730 0740 7.4 79 41 8 D323 0740 0750 7.5 79 41 8 D323 0750 0754 7.54 19/64 79 41 8 D323 0754 0760 7.6 79 41 8 D323 0760 0770 7.7 79 41 8 D323 0770 0780 7.8 79 41 8 D323 0780 0790 7.9 79 41 8 D323 0790 0794 7.94 5/16 79 41 8 D323 0794 0800 8.0 79 41 8 D323 0800 0810 8.1 89 47 10 D323 0810 0820 8.2 89 47 10 D323 0820 0830 8.3 89 47 10 D323 0830 0833 8.33 21/64 89 47 10 D323 0833 0840 8.4 89 47 10 D323 0840 0850 8.5 89 47 10 D323 0850 0860 8.6 89 47 10 D323 0860 0870 8.7 89 47 10 D323 0870 0873 8.73 11/32 89 47 10 D323 0873 0880 8.8 89 47 10 D323 0880 0890 8.9 89 47 10 D323 0890 0900 9.0 89 47 10 D323 0900 0910 9.1 89 47 10 D323 0910 0913 9.13 23/64 89 47 10 D323 0913 0920 9.2 89 47 10 D323 0920 0930 9.3 89 47 10 D323 0930 23

9. HA NOTE: HE shanks available, subject to lead time. Catalogue Code D356 Discount Group A0210 Material VHM Surface Finish HELICA Sutton Designation VA Geometry R30 - IK Point Type 140° 4 Facet Form C Shank Form (DIN 6535) HA Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # - Excellent solution for stainless steels and difficult super alloy type materials - Optimised geometry ensures no work hardening and high productivity - HELICA for outstanding oxidation resistance and hot hardness Drills Carbide, 3 x D, R30 VA Black Magic P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials D356 VDI 3323 ISO • 1 P • 2 • 3 • 4 • 5 • 6 • 7 • 8 9 • 10 11 • 12 • 13 • 14.1 M • 14.2 • 14.3 15 K 16 17 18 19 20 • 21 N • 22 • 23 • 24 • 25 26 27 28 29 30 • 31 S • 32 • 33 • 34 • 35 • 36 • 3 7.1 • 3 7. 2 • 3 7. 3 • 3 7. 4 • 3 7. 5 • Optimal • Effective 3 8.1 H 38.2 3 9.1 39.2 40 41 0300 3.0 62 20 6 D356 0300 0310 3.1 62 20 6 D356 0310 0318 3.18 1/8 62 20 6 D356 0318 0320 3.2 62 20 6 D356 0320 0330 3.3 62 20 6 D356 0330 0340 3.4 62 20 6 D356 0340 0350 3.5 62 20 6 D356 0350 0357 3.57 9/64 62 20 6 D356 0357 0360 3.6 62 20 6 D356 0360 0370 3.7 62 20 6 D356 0370 0380 3.8 66 24 6 D356 0380 0390 3.9 66 24 6 D356 0390 0397 3.97 5/32 66 24 6 D356 0397 0400 4.0 66 24 6 D356 0400 0410 4.1 66 24 6 D356 0410 0420 4.2 66 24 6 D356 0420 0430 4.3 66 24 6 D356 0430 0437 4.37 11/64 66 24 6 D356 0437 0440 4.4 66 24 6 D356 0440 0450 4.5 66 24 6 D356 0450 0460 4.6 66 24 6 D356 0460 0470 4.7 66 24 6 D356 0470 0476 4.76 3/16 66 24 6 D356 0476 0480 4.8 66 28 6 D356 0480 0490 4.9 66 28 6 D356 0490 0500 5.0 66 28 6 D356 0500 0510 5.1 66 28 6 D356 0510 0516 5.16 13/64 66 28 6 D356 0516 0520 5.2 66 28 6 D356 0520 0530 5.3 66 28 6 D356 0530 0540 5.4 66 28 6 D356 0540 0550 5.5 66 28 6 D356 0550 0556 5.56 7/32 66 28 6 D356 0556 0560 5.6 66 28 6 D356 0560 0570 5.7 66 28 6 D356 0570 0580 5.8 66 28 6 D356 0580 0590 5.9 66 28 6 D356 0590 0595 5.95 15/64 66 28 6 D356 0595 0600 6.0 66 28 6 D356 0600 0610 6.1 79 34 8 D356 0610 0620 6.2 79 34 8 D356 0620 0630 6.3 79 34 8 D356 0630 0635 6.35 1/4 79 34 8 D356 0635 0640 6.4 79 34 8 D356 0640 0650 6.5 79 34 8 D356 0650 0660 6.6 79 34 8 D356 0660 0670 6.7 79 34 8 D356 0670 0676 6.76 17/64 79 34 8 D356 0676 0680 6.8 79 34 8 D356 0680 0690 6.9 79 34 8 D356 0690 0700 7.0 79 34 8 D356 0700 0710 7.1 79 41 8 D356 0710 0714 7.14 9/32 79 41 8 D356 0714 0720 7.2 79 41 8 D356 0720 0730 7.3 79 41 8 D356 0730 0740 7.4 79 41 8 D356 0740 0750 7.5 79 41 8 D356 0750 0754 7.54 19/64 79 41 8 D356 0754 0760 7.6 79 41 8 D356 0760 0770 7.7 79 41 8 D356 0770 0780 7.8 79 41 8 D356 0780 0790 7.9 79 41 8 D356 0790 0794 7.94 5/16 79 41 8 D356 0794 0800 8.0 79 41 8 D356 0800 0810 8.1 89 47 10 D356 0810 0820 8.2 89 47 10 D356 0820 0830 8.3 89 47 10 D356 0830 0833 8.33 21/64 89 47 10 D356 0833 0840 8.4 89 47 10 D356 0840 0850 8.5 89 47 10 D356 0850 0860 8.6 89 47 10 D356 0860 0870 8.7 89 47 10 D356 0870 0873 8.73 11/32 89 47 10 D356 0873 0880 8.8 89 47 10 D356 0880 0890 8.9 89 47 10 D356 0890 0900 9.0 89 47 10 D356 0900 0910 9.1 89 47 10 D356 0910 0913 9.13 23/64 89 47 10 D356 0913 0920 9.2 89 47 10 D356 0920 0930 9.3 89 47 10 D356 0930 27

19. HA NOTE: HE shanks available, subject to lead time. - Excellent solution for stainless steels and difficult super alloy type materials - Optimised geometry ensures no work hardening and high productivity - HELICA for outstanding oxidation resistance and hot hardness Drills Carbide, 5 x D, R30 VA Black Magic Catalogue Code D358 Discount Group A0210 Material VHM Surface Finish HELICA Sutton Designation VA Geometry R30 - IK Point Type 140° 4 Facet Form C Shank Form (DIN 6535) HA Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials D358 VDI 3323 ISO • 1 P • 2 • 3 • 4 • 5 • 6 • 7 • 8 9 • 10 11 • 12 • 13 • 14.1 M • 14.2 • 14.3 15 K 16 17 18 19 20 • 21 N • 22 • 23 • 24 • 25 26 27 28 29 30 • 31 S • 32 • 33 • 34 • 35 • 36 • 3 7.1 • 3 7. 2 • 3 7. 3 • 3 7. 4 • 3 7. 5 • Optimal • Effective 3 8.1 H 38.2 3 9.1 39.2 40 41 0300 3.0 66 28 6 D358 0300 0310 3.1 66 28 6 D358 0310 0318 3.18 1/8 66 28 6 D358 0318 0320 3.2 66 28 6 D358 0320 0330 3.3 66 28 6 D358 0330 0340 3.4 66 28 6 D358 0340 0350 3.5 66 28 6 D358 0350 0357 3.57 9/64 66 28 6 D358 0357 0360 3.6 66 28 6 D358 0360 0370 3.7 66 28 6 D358 0370 0380 3.8 74 36 6 D358 0380 0390 3.9 74 36 6 D358 0390 0397 3.97 5/32 74 36 6 D358 0397 0400 4.0 74 36 6 D358 0400 0410 4.1 74 36 6 D358 0410 0420 4.2 74 36 6 D358 0420 0430 4.3 74 36 6 D358 0430 0437 4.37 11/64 74 36 6 D358 0437 0440 4.4 74 36 6 D358 0440 0450 4.5 74 36 6 D358 0450 0460 4.6 74 36 6 D358 0460 0470 4.7 74 36 6 D358 0470 0476 4.76 3/16 74 36 6 D358 0476 0480 4.8 82 44 6 D358 0480 0490 4.9 82 44 6 D358 0490 0500 5.0 82 44 6 D358 0500 0510 5.1 82 44 6 D358 0510 0516 5.16 13/64 82 44 6 D358 0516 0520 5.2 82 44 6 D358 0520 0530 5.3 82 44 6 D358 0530 0540 5.4 82 44 6 D358 0540 0550 5.5 82 44 6 D358 0550 0556 5.56 7/32 82 44 6 D358 0556 0560 5.6 82 44 6 D358 0560 0570 5.7 82 44 6 D358 0570 0580 5.8 82 44 6 D358 0580 0590 5.9 82 44 6 D358 0590 0595 5.95 15/64 82 44 6 D358 0595 0600 6.0 82 44 6 D358 0600 0610 6.1 91 53 8 D358 0610 0620 6.2 91 53 8 D358 0620 0630 6.3 91 53 8 D358 0630 0635 6.35 1/4 91 53 8 D358 0635 0640 6.4 91 53 8 D358 0640 0650 6.5 91 53 8 D358 0650 0660 6.6 91 53 8 D358 0660 0670 6.7 91 53 8 D358 0670 0676 6.76 17/64 91 53 8 D358 0676 0680 6.8 91 53 8 D358 0680 0690 6.9 91 53 8 D358 0690 0700 7.0 91 53 8 D358 0700 0710 7.1 91 53 8 D358 0710 0714 7.14 9/32 91 53 8 D358 0714 0720 7.2 91 53 8 D358 0720 0730 7.3 91 53 8 D358 0730 0740 7.4 91 53 8 D358 0740 0750 7.5 91 53 8 D358 0750 0754 7.54 19/64 91 53 8 D358 0754 0760 7.6 91 53 8 D358 0760 0770 7.7 91 53 8 D358 0770 0780 7.8 91 53 8 D358 0780 0790 7.9 91 53 8 D358 0790 0794 7.94 5/16 91 53 8 D358 0794 0800 8.0 91 53 8 D358 0800 0810 8.1 103 61 10 D358 0810 0820 8.2 103 61 10 D358 0820 0830 8.3 103 61 10 D358 0830 0833 8.33 21/64 103 61 10 D358 0833 0840 8.4 103 61 10 D358 0840 0850 8.5 103 61 10 D358 0850 0860 8.6 103 61 10 D358 0860 0870 8.7 103 61 10 D358 0870 0873 8.73 11/32 103 61 10 D358 0873 0880 8.8 103 61 10 D358 0880 0890 8.9 103 61 10 D358 0890 0900 9.0 103 61 10 D358 0900 0910 9.1 103 61 10 D358 0910 0913 9.13 23/64 103 61 10 D358 0913 0920 9.2 103 61 10 D358 0920 0930 9.3 103 61 10 D358 0930 37

15. HA NOTE: HE shanks available, subject to lead time. - Suitable for materials up to 1400N/mm 2 - Strong core - Micro geometry & surface conditioning for optimal chip control - AlCrN for maximum tool life Drills Carbide, 5 x D, R30 N Catalogue Code D326 Discount Group A0210 Material VHM Surface Finish AlCrN Sutton Designation N Geometry R30 Point Type 140° Form C Shank Form (DIN 6535) HA Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials D326 VDI 3323 ISO • 1 P • 2 • 3 • 4 • 5 • 6 • 7 • 8 • 9 • 10 • 11 12 • 13 14.1 M 14.2 • 14.3 • 15 K • 16 • 17 • 18 • 19 • 20 21 N 22 23 24 25 26 27 28 29 30 31 S 32 33 34 35 • 36 • 3 7.1 • 3 7. 2 3 7. 3 • 3 7. 4 3 7. 5 • Optimal • Effective • 3 8.1 H 38.2 3 9.1 39.2 • 40 41 0300 3.0 66 28 6 D326 0300 0310 3.1 66 28 6 D326 0310 0318 3.18 1/8 66 28 6 D326 0318 0320 3.2 66 28 6 D326 0320 0330 3.3 66 28 6 D326 0330 0340 3.4 66 28 6 D326 0340 0350 3.5 66 28 6 D326 0350 0357 3.57 9/64 66 28 6 D326 0357 0360 3.6 66 28 6 D326 0360 0370 3.7 66 28 6 D326 0370 0380 3.8 74 36 6 D326 0380 0390 3.9 74 36 6 D326 0390 0397 3.97 5/32 74 36 6 D326 0397 0400 4.0 74 36 6 D326 0400 0410 4.1 74 36 6 D326 0410 0420 4.2 74 36 6 D326 0420 0430 4.3 74 36 6 D326 0430 0437 4.37 11/64 74 36 6 D326 0437 0440 4.4 74 36 6 D326 0440 0450 4.5 74 36 6 D326 0450 0460 4.6 74 36 6 D326 0460 0470 4.7 74 36 6 D326 0470 0476 4.76 3/16 74 36 6 D326 0476 0480 4.8 82 44 6 D326 0480 0490 4.9 82 44 6 D326 0490 0500 5.0 82 44 6 D326 0500 0510 5.1 82 44 6 D326 0510 0516 5.16 13/64 82 44 6 D326 0516 0520 5.2 82 44 6 D326 0520 0530 5.3 82 44 6 D326 0530 0540 5.4 82 44 6 D326 0540 0550 5.5 82 44 6 D326 0550 0556 5.56 7/32 82 44 6 D326 0556 0560 5.6 82 44 6 D326 0560 0570 5.7 82 44 6 D326 0570 0580 5.8 82 44 6 D326 0580 0590 5.9 82 44 6 D326 0590 0595 5.95 15/64 82 44 6 D326 0595 0600 6.0 82 44 6 D326 0600 0610 6.1 91 53 8 D326 0610 0620 6.2 91 53 8 D326 0620 0630 6.3 91 53 8 D326 0630 0635 6.35 1/4 91 53 8 D326 0635 0640 6.4 91 53 8 D326 0640 0650 6.5 91 53 8 D326 0650 0660 6.6 91 53 8 D326 0660 0670 6.7 91 53 8 D326 0670 0676 6.76 17/64 91 53 8 D326 0676 0680 6.8 91 53 8 D326 0680 0690 6.9 91 53 8 D326 0690 0700 7.0 91 53 8 D326 0700 0710 7.1 91 53 8 D326 0710 0714 7.14 9/32 91 53 8 D326 0714 0720 7.2 91 53 8 D326 0720 0730 7.3 91 53 8 D326 0730 0740 7.4 91 53 8 D326 0740 0750 7.5 91 53 8 D326 0750 0754 7.54 19/64 91 53 8 D326 0754 0760 7.6 91 53 8 D326 0760 0770 7.7 91 53 8 D326 0770 0780 7.8 91 53 8 D326 0780 0790 7.9 91 53 8 D326 0790 0794 7.94 5/16 91 53 8 D326 0794 0800 8.0 91 53 8 D326 0800 0810 8.1 103 61 10 D326 0810 0820 8.2 103 61 10 D326 0820 0830 8.3 103 61 10 D326 0830 0833 8.33 21/64 103 61 10 D326 0833 0840 8.4 103 61 10 D326 0840 0850 8.5 103 61 10 D326 0850 0860 8.6 103 61 10 D326 0860 0870 8.7 103 61 10 D326 0870 0873 8.73 11/32 103 61 10 D326 0873 0880 8.8 103 61 10 D326 0880 0890 8.9 103 61 10 D326 0890 0900 9.0 103 61 10 D326 0900 0910 9.1 103 61 10 D326 0910 0913 9.13 23/64 103 61 10 D326 0913 0920 9.2 103 61 10 D326 0920 0930 9.3 103 61 10 D326 0930 0940 9.4 103 61 10 D326 0940 0950 9.5 103 61 10 D326 0950 0953 9.53 3/8 103 61 10 D326 0953 0960 9.6 103 61 10 D326 0960 33

17. HA NOTE: HE shanks available, subject to lead time. - Suitable for materials up to 1400N/mm 2 - Strong core with internal coolant supply - Micro geometry & surface conditioning for optimal chip control - AlCrN for maximum tool life Drills Carbide, 5 x D, R30 N, IK Catalogue Code D332 Discount Group A0210 Material VHM Surface Finish AlCrN Sutton Designation N Geometry R30 - IK Point Type 140° Form C Shank Form (DIN 6535) HA Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials D332 VDI 3323 ISO • 1 P • 2 • 3 • 4 • 5 • 6 • 7 • 8 • 9 • 10 • 11 • 12 • 13 • 14.1 M • 14.2 • 14.3 • 15 K • 16 • 17 • 18 • 19 • 20 21 N 22 23 24 • 25 • 26 • 27 • 28 29 30 • 31 S • 32 • 33 • 34 • 35 • 36 • 3 7.1 • 3 7. 2 • 3 7. 3 • 3 7. 4 • 3 7. 5 • Optimal • Effective • 3 8.1 H 38.2 3 9.1 39.2 • 40 41 0300 3.0 66 28 6 D332 0300 0310 3.1 66 28 6 D332 0310 0318 3.18 1/8 66 28 6 D332 0318 0320 3.2 66 28 6 D332 0320 0330 3.3 66 28 6 D332 0330 0340 3.4 66 28 6 D332 0340 0350 3.5 66 28 6 D332 0350 0357 3.57 9/64 66 28 6 D332 0357 0360 3.6 66 28 6 D332 0360 0370 3.7 66 28 6 D332 0370 0380 3.8 74 36 6 D332 0380 0390 3.9 74 36 6 D332 0390 0397 3.97 5/32 74 36 6 D332 0397 0400 4.0 74 36 6 D332 0400 0410 4.1 74 36 6 D332 0410 0420 4.2 74 36 6 D332 0420 0430 4.3 74 36 6 D332 0430 0437 4.37 11/64 74 36 6 D332 0437 0440 4.4 74 36 6 D332 0440 0450 4.5 74 36 6 D332 0450 0460 4.6 74 36 6 D332 0460 0470 4.7 74 36 6 D332 0470 0476 4.76 3/16 74 36 6 D332 0476 0480 4.8 82 44 6 D332 0480 0490 4.9 82 44 6 D332 0490 0500 5.0 82 44 6 D332 0500 0510 5.1 82 44 6 D332 0510 0516 5.16 13/64 82 44 6 D332 0516 0520 5.2 82 44 6 D332 0520 0530 5.3 82 44 6 D332 0530 0540 5.4 82 44 6 D332 0540 0550 5.5 82 44 6 D332 0550 0556 5.56 7/32 82 44 6 D332 0556 0560 5.6 82 44 6 D332 0560 0570 5.7 82 44 6 D332 0570 0580 5.8 82 44 6 D332 0580 0590 5.9 82 44 6 D332 0590 0595 5.95 15/64 82 44 6 D332 0595 0600 6.0 82 44 6 D332 0600 0610 6.1 91 53 8 D332 0610 0620 6.2 91 53 8 D332 0620 0630 6.3 91 53 8 D332 0630 0635 6.35 1/4 91 53 8 D332 0635 0640 6.4 91 53 8 D332 0640 0650 6.5 91 53 8 D332 0650 0660 6.6 91 53 8 D332 0660 0670 6.7 91 53 8 D332 0670 0676 6.76 17/64 91 53 8 D332 0676 0680 6.8 91 53 8 D332 0680 0690 6.9 91 53 8 D332 0690 0700 7.0 91 53 8 D332 0700 0710 7.1 91 53 8 D332 0710 0714 7.14 9/32 91 53 8 D332 0714 0720 7.2 91 53 8 D332 0720 0730 7.3 91 53 8 D332 0730 0740 7.4 91 53 8 D332 0740 0750 7.5 91 53 8 D332 0750 0754 7.54 19/64 91 53 8 D332 0754 0760 7.6 91 53 8 D332 0760 0770 7.7 91 53 8 D332 0770 0780 7.8 91 53 8 D332 0780 0790 7.9 91 53 8 D332 0790 0794 7.94 5/16 91 53 8 D332 0794 0800 8.0 91 53 8 D332 0800 0810 8.1 103 61 10 D332 0810 0820 8.2 103 61 10 D332 0820 0830 8.3 103 61 10 D332 0830 0833 8.33 21/64 103 61 10 D332 0833 0840 8.4 103 61 10 D332 0840 0850 8.5 103 61 10 D332 0850 0860 8.6 103 61 10 D332 0860 0870 8.7 103 61 10 D332 0870 0873 8.73 11/32 103 61 10 D332 0873 0880 8.8 103 61 10 D332 0880 0890 8.9 103 61 10 D332 0890 0900 9.0 103 61 10 D332 0900 0910 9.1 103 61 10 D332 0910 0913 9.13 23/64 103 61 10 D332 0913 0920 9.2 103 61 10 D332 0920 0930 9.3 103 61 10 D332 0930 35

7. HA NOTE: HE shanks available, subject to lead time. Catalogue Code D329 Discount Group A0210 Material VHM Surface Finish AlCrN Sutton Designation N Geometry R30 - IK Point Type 140° Form C Shank Form (DIN 6535) HA Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # Size Ref. d 1 (m7) l 1 l 2 d 2 (h6) Item # - Suitable for materials up to 1400N/mm 2 - Strong core with internal coolant supply - Micro geometry & surface conditioning for optimal chip control - AlCrN for maximum tool life Drills Carbide, 3 x D, R30 N, IK P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials D329 VDI 3323 ISO • 1 P • 2 • 3 • 4 • 5 • 6 • 7 • 8 • 9 • 10 • 11 • 12 • 13 • 14.1 M • 14.2 • 14.3 • 15 K • 16 • 17 • 18 • 19 • 20 21 N 22 23 24 • 25 • 26 • 27 • 28 29 30 • 31 S • 32 • 33 • 34 • 35 • 36 • 3 7.1 • 3 7. 2 • 3 7. 3 • 3 7. 4 • 3 7. 5 • Optimal • Effective • 3 8.1 H 38.2 3 9.1 39.2 • 40 41 0300 3.0 62 20 6 D329 0300 0310 3.1 62 20 6 D329 0310 0318 3.18 1/8 62 20 6 D329 0318 0320 3.2 62 20 6 D329 0320 0330 3.3 62 20 6 D329 0330 0340 3.4 62 20 6 D329 0340 0350 3.5 62 20 6 D329 0350 0357 3.57 9/64 62 20 6 D329 0357 0360 3.6 62 20 6 D329 0360 0370 3.7 62 20 6 D329 0370 0380 3.8 66 24 6 D329 0380 0390 3.9 66 24 6 D329 0390 0397 3.97 5/32 66 24 6 D329 0397 0400 4.0 66 24 6 D329 0400 0410 4.1 66 24 6 D329 0410 0420 4.2 66 24 6 D329 0420 0430 4.3 66 24 6 D329 0430 0437 4.37 11/64 66 24 6 D329 0437 0440 4.4 66 24 6 D329 0440 0450 4.5 66 24 6 D329 0450 0460 4.6 66 24 6 D329 0460 0470 4.7 66 24 6 D329 0470 0476 4.76 3/16 66 24 6 D329 0476 0480 4.8 66 28 6 D329 0480 0490 4.9 66 28 6 D329 0490 0500 5.0 66 28 6 D329 0500 0510 5.1 66 28 6 D329 0510 0516 5.16 13/64 66 28 6 D329 0516 0520 5.2 66 28 6 D329 0520 0530 5.3 66 28 6 D329 0530 0540 5.4 66 28 6 D329 0540 0550 5.5 66 28 6 D329 0550 0556 5.56 7/32 66 28 6 D329 0556 0560 5.6 66 28 6 D329 0560 0570 5.7 66 28 6 D329 0570 0580 5.8 66 28 6 D329 0580 0590 5.9 66 28 6 D329 0590 0595 5.95 15/64 66 28 6 D329 0595 0600 6.0 66 28 6 D329 0600 0610 6.1 79 34 8 D329 0610 0620 6.2 79 34 8 D329 0620 0630 6.3 79 34 8 D329 0630 0635 6.35 1/4 79 34 8 D329 0635 0640 6.4 79 34 8 D329 0640 0650 6.5 79 34 8 D329 0650 0660 6.6 79 34 8 D329 0660 0670 6.7 79 34 8 D329 0670 0676 6.76 17/64 79 34 8 D329 0676 0680 6.8 79 34 8 D329 0680 0690 6.9 79 34 8 D329 0690 0700 7.0 79 34 8 D329 0700 0710 7.1 79 41 8 D329 0710 0714 7.14 9/32 79 41 8 D329 0714 0720 7.2 79 41 8 D329 0720 0730 7.3 79 41 8 D329 0730 0740 7.4 79 41 8 D329 0740 0750 7.5 79 41 8 D329 0750 0754 7.54 19/64 79 41 8 D329 0754 0760 7.6 79 41 8 D329 0760 0770 7.7 79 41 8 D329 0770 0780 7.8 79 41 8 D329 0780 0790 7.9 79 41 8 D329 0790 0794 7.94 5/16 79 41 8 D329 0794 0800 8.0 79 41 8 D329 0800 0810 8.1 89 47 10 D329 0810 0820 8.2 89 47 10 D329 0820 0830 8.3 89 47 10 D329 0830 0833 8.33 21/64 89 47 10 D329 0833 0840 8.4 89 47 10 D329 0840 0850 8.5 89 47 10 D329 0850 0860 8.6 89 47 10 D329 0860 0870 8.7 89 47 10 D329 0870 0873 8.73 11/32 89 47 10 D329 0873 0880 8.8 89 47 10 D329 0880 0890 8.9 89 47 10 D329 0890 0900 9.0 89 47 10 D329 0900 0910 9.1 89 47 10 D329 0910 0913 9.13 23/64 89 47 10 D329 0913 0920 9.2 89 47 10 D329 0920 0930 9.3 89 47 10 D329 0930 25

3. Page Catalogue Code 122160 D323 D329 D356 D304 D310 D300 D306 D326 D332 D358 D335 123300 D318 D319 D355 D364 D365 D366 Material VHM VHM Surface Finish TiN AlCrN Helica Brt TiCN Brt TiCN AlCrN Helica AlCrN TiAlN Brt TiCN Brt AlCrN Brt AlCrN Sutton Designation N VA NH GG N VA N UNI N NC Standard DIN 6539 DIN 6537 - DIN 6537 - ANSI B94-11 DIN 1897 Depth of Cut 3 x D 5 x D 8 x D - Shank Tolerance HA HA - HA ISO VDI^ 3323 Material Condition HB N/mm 2 VDI^ 3323 ISO P 1 Steel - Non-alloy, cast & free cutting ~ 0.15 %C A 125 440 • • • • • • • • • • • • 1 P 2 ~ 0.45 %C A 190 640 • • • • • • • • • • • • 2 3 QT 250 840 • • • • • • • • • • • • • • • • • 3 4 ~ 0.75 %C A 270 910 • • • • • • • • • • • • • • • • • 4 5 QT 300 1010 • • • • • • • • • • • • • • • • • 5 6 Steel - Low alloy & cast < 5% of alloying elements A 180 610 • • • • • • • • • • • • 6 7 QT 275 930 • • • • • • • • • • • • • • • • • 7 8 QT 300 1010 • • • • • • • • • • • • • • • • • 8 9 QT 350 1180 • • • • • • • • • • • • • 9 10 Steel - High alloy, cast & tool A 200 680 • • • • • • • • • • • • • • • • • 10 11 HT 325 1100 • • • • • • • • • • • • • 11 12 Steel - Corrosion resistant & cast Ferritic / Martensitic A 200 680 • • • • • • • • • • 12 13 Martensitic QT 240 810 • • • • • • • • • • • • • • • 13 M 14.1 Stainless Steel Austenitic AH 180 610 • • • • • • • • • • • • 14.1 M 14.2 Duplex 250 840 • • • • • • • • • • • • 14.2 14.3 Precipitation Hardening 250 840 • • • • • • • • • • • • • • • 14.3 K 15 Cast Iron - Grey (GG) Ferritic / Pearlitic 180 610 • • • • • • • • • • • • • • • • • 15 K 16 Pearlitic 260 880 • • • • • • • • • • • • • • • • • 16 17 Cast Iron - Nodular (GGG) Ferritic 160 570 • • • • • • • • • • • • • • • • • 17 18 Pearlitic 250 840 • • • • • • • • • • • • • • • • • 18 19 Cast Iron - Malleable Ferritic 130 460 • • • • • • • • • • • • • • • • • 19 20 Pearlitic 230 780 • • • • • • • • • • • • • • • • • 20 N 21 Aluminum & Magnesium - wrought alloy Non Heat Treatable 60 210 • • • • • • • 21 N 22 Heat Treatable AH 100 360 • • • • • • • 22 23 Aluminum & Magnesium - cast alloy ≤12% Si Non Heat Treatable 75 270 • • • • • • • • • 23 24 Heat Treatable AH 90 320 • • • • • • • • • 24 25 Al & Mg - cast alloy >12% Si Non Heat Treatable 130 460 • • • • • • • • • • • 25 26 Copper & Cu alloys (Brass/Bronze) Free cutting, Pb > 1% 110 390 • • • • • • • • • 26 27 Brass (CuZn, CuSnZn) 90 320 • • • • • • • • • 27 28 Bronze (CuSn) 100 360 • • • • • • • 28 29 Non-metallic - Thermosetting & fiber-reinforced plastics • • • • 29 30 Non-metallic - Hard rubber, wood etc. 30 S 31 High temp. alloys Fe based A 200 680 • • • • • • • 31 S 32 AH 280 950 • • • • • • • 32 33 Ni / Co based A 250 840 • • • • • • • 33 34 AH 350 1180 • • • • • • • 34 35 C 320 1080 • • • • • • • 35 36 Titanium & Ti alloys CP Titanium 400 MPa • • • • • • • • • • 36 37.1 Alpha alloys 860 MPa • • • • • • • • • • • • • 37.1 37.2 Alpha / Beta alloys A 960 MPa • • • • • • • • • • • • • 37.2 37.3 AH 1170 MPa • • • • • • • • • • 37.3 37.4 Beta alloys A 830 MPa • • • • • • • • • • • • • 37.4 37.5 AH 1400 MPa • • • • • • • • • • 37.5 H 3 8.1 Hardened steel HT 45 HRC • • • • • • • • • • • • • 3 8.1 H 38.2 HT 55 HRC • • • • • • • • 38.2 3 9.1 HT 58 HRC • • • • • • 3 9.1 39.2 HT 62 HRC • • • • • • 39.2 40 Cast Iron Chilled C 400 1350 • • • • • • • • • • • • • • • • 40 41 HT 55 HRC • • • • • • 41 Condition: A (Annealed), AH (Age Hardened), C (Cast), HT (Hardened & Tempered), QT (Quenched & Tempered) 21 37 43 43 43 43 42 42 41 39 35 33

2. Drills Finder - Carbide Page Catalogue Code 122160 D323 D329 D356 D304 D310 D300 D306 D326 D332 D358 D335 123300 D318 D319 D355 D364 D365 D366 Material VHM VHM Surface Finish TiN AlCrN Helica Brt TiCN Brt TiCN AlCrN Helica AlCrN TiAlN Brt TiCN Brt AlCrN Brt AlCrN Sutton Designation N VA NH GG N VA N UNI N NC Standard DIN 6539 DIN 6537 - DIN 6537 - ANSI B94-11 DIN 1897 Depth of Cut 3 x D 5 x D 8 x D - Shank Tolerance HA HA - HA ISO VDI^ 3323 Material Condition HB N/mm 2 VDI^ 3323 ISO P 1 Steel - Non-alloy, cast & free cutting ~ 0.15 %C A 125 440 • • • • • • • • • • • • 1 P 2 ~ 0.45 %C A 190 640 • • • • • • • • • • • • 2 3 QT 250 840 • • • • • • • • • • • • • • • • • 3 4 ~ 0.75 %C A 270 910 • • • • • • • • • • • • • • • • • 4 5 QT 300 1010 • • • • • • • • • • • • • • • • • 5 6 Steel - Low alloy & cast < 5% of alloying elements A 180 610 • • • • • • • • • • • • 6 7 QT 275 930 • • • • • • • • • • • • • • • • • 7 8 QT 300 1010 • • • • • • • • • • • • • • • • • 8 9 QT 350 1180 • • • • • • • • • • • • • 9 10 Steel - High alloy, cast & tool A 200 680 • • • • • • • • • • • • • • • • • 10 11 HT 325 1100 • • • • • • • • • • • • • 11 12 Steel - Corrosion resistant & cast Ferritic / Martensitic A 200 680 • • • • • • • • • • 12 13 Martensitic QT 240 810 • • • • • • • • • • • • • • • 13 M 14.1 Stainless Steel Austenitic AH 180 610 • • • • • • • • • • • • 14.1 M 14.2 Duplex 250 840 • • • • • • • • • • • • 14.2 14.3 Precipitation Hardening 250 840 • • • • • • • • • • • • • • • 14.3 K 15 Cast Iron - Grey (GG) Ferritic / Pearlitic 180 610 • • • • • • • • • • • • • • • • • 15 K 16 Pearlitic 260 880 • • • • • • • • • • • • • • • • • 16 17 Cast Iron - Nodular (GGG) Ferritic 160 570 • • • • • • • • • • • • • • • • • 17 18 Pearlitic 250 840 • • • • • • • • • • • • • • • • • 18 19 Cast Iron - Malleable Ferritic 130 460 • • • • • • • • • • • • • • • • • 19 20 Pearlitic 230 780 • • • • • • • • • • • • • • • • • 20 N 21 Aluminum & Magnesium - wrought alloy Non Heat Treatable 60 210 • • • • • • • 21 N 22 Heat Treatable AH 100 360 • • • • • • • 22 23 Aluminum & Magnesium - cast alloy ≤12% Si Non Heat Treatable 75 270 • • • • • • • • • 23 24 Heat Treatable AH 90 320 • • • • • • • • • 24 25 Al & Mg - cast alloy >12% Si Non Heat Treatable 130 460 • • • • • • • • • • • 25 26 Copper & Cu alloys (Brass/Bronze) Free cutting, Pb > 1% 110 390 • • • • • • • • • 26 27 Brass (CuZn, CuSnZn) 90 320 • • • • • • • • • 27 28 Bronze (CuSn) 100 360 • • • • • • • 28 29 Non-metallic - Thermosetting & fiber-reinforced plastics • • • • 29 30 Non-metallic - Hard rubber, wood etc. 30 S 31 High temp. alloys Fe based A 200 680 • • • • • • • 31 S 32 AH 280 950 • • • • • • • 32 33 Ni / Co based A 250 840 • • • • • • • 33 34 AH 350 1180 • • • • • • • 34 35 C 320 1080 • • • • • • • 35 36 Titanium & Ti alloys CP Titanium 400 MPa • • • • • • • • • • 36 37.1 Alpha alloys 860 MPa • • • • • • • • • • • • • 37.1 37.2 Alpha / Beta alloys A 960 MPa • • • • • • • • • • • • • 37.2 37.3 AH 1170 MPa • • • • • • • • • • 37.3 37.4 Beta alloys A 830 MPa • • • • • • • • • • • • • 37.4 37.5 AH 1400 MPa • • • • • • • • • • 37.5 H 3 8.1 Hardened steel HT 45 HRC • • • • • • • • • • • • • 3 8.1 H 38.2 HT 55 HRC • • • • • • • • 38.2 3 9.1 HT 58 HRC • • • • • • 3 9.1 39.2 HT 62 HRC • • • • • • 39.2 40 Cast Iron Chilled C 400 1350 • • • • • • • • • • • • • • • • 40 41 HT 55 HRC • • • • • • 41 Condition: A (Annealed), AH (Age Hardened), C (Cast), HT (Hardened & Tempered), QT (Quenched & Tempered) ISO VDI Material Group Sutton P A Steel N UNI M R Stainless Steel VA K F Cast Iron GG N N Non-Ferrous Metals, Aluminiums & Coppers AI W S S Titaniums & Super Alloys Ti Ni H H Hard Materials (≥ 45 HRC) H ^ VDI 3323 material groups can also be determined by referring to the material cross reference listing in the application guide at the back of this catalogue. • Optimal • Effective 20 27 22 29 29 31 31 23 25

Views

  • 1394 Total Views
  • 1229 Website Views

Actions

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+